This water pump can be used for industry, agriculture, family water circulation and pressurization. Pump spindle change form motive seal to closed static sealing, so that the leakage of the medium is completely avoided. Brushless Motor,Super long working life.low consumption & low noise. Amphibious design.Submersible installation and entirely waterproof. 

Specifications:
Rated voltage: DC 12V
Power: 10W
Rated current: 0.8A (maximum)
Inlet/outlet size: 1/2"
Thread: 20 mm
Flow: 8L/min (max)
Water temperature: Max. 55℃ 
Wire length: 80cm
Low noise: < 35db
Life span: > 40000hrs
Delivery medium: clean water
Size: 10 * 9cm / 3.94 x 3.54inch
Weight: 257g

Package Includes:
1 x Water Pump

Note: 
1.Please allow small size error due to manual measurement. Thanks for your understanding.
2. If you use this pump for circulating wort it should be cleaned out after using it

How to Choose pump: 
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump; 
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet); 
3. Working environment (temperature and medium); 
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment. 

• This DC 12V hot water circulation pump is perfect for the family home thermal solar systems or any circulation pump application where conventional power is not available. Can be used for industry, agriculture, family water circulation and pressurization
• Pump spindle change form motive seal to closed static sealing, so that the leakage of the medium is completely avoided,Horizontal inlet and outlet with rotatable cap, easy installation. Brushless Motor,Super long working life.low consumption & low noise.
• Durable and leakage-prevented: With strong PPS shell made epoxy resin & teflon sealed! The pump can hold hot water temperature up to 55 degrees Celsius.this pump is sturdy and durable， completely waterproof
• Both inlet and outlet threads are 1/2 BSP standard, fitting for many connection
• Convenient to install and easy to use, there is a arrow mark on top which shows flow direction,This pump is intended for use with water only.