Aquatica Plus is part of the Amazon Affiliate Network. We may receive payment for items purchased through the Amazon website.
Features:
- Plug and play design, easy to use.
- Support reading with Centigrade or Fahrenheit unit.
- Temperature calibration.
- Compressor delay protection for refrigeration control.
- High and low temperature alarms are available.
- Over-temperature and sensor fault alarm.
- Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.
Specification:
Temperature Control Range : -50~120°C / -58~248 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308S Temperature Controller
1x 1.97" Female to Male NTC Sensor
1x Manual
- Plug and play design, easy to use.
- Support reading with Centigrade or Fahrenheit unit.
- Temperature calibration.
- Compressor delay protection for refrigeration control.
- High and low temperature alarms are available.
- Over-temperature and sensor fault alarm.
- Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.
Specification:
Temperature Control Range : -50~120°C / -58~248 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308S Temperature Controller
1x 1.97" Female to Male NTC Sensor
1x Manual
- [Convenient Design] Support °F/ °C display. Easy to set, PV and SV dual display windows.
- [Dual Relay Output] You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Waterproof Sensor] The temperature controller sensor is stainless and waterproof IP68.
- [Alarm for Safe] Alarm when over-temperature and sensor error. Maximum output load: 1200W(110V).
Inkbird Temperature Controller ITC-308S Heating Cooling Dual Stage for Homebrewing Fridge Aquarium
- Brand: Inkbird Tech
- Product Code: B01GZLYXVO
- Note: Aquatica Plus is an Amazon Affiliate and may receive payment for items purchased on Amazon.